重金屬當然可以用超聲波清洗機清洗，并且對于重金屬工件的清洗需求，超聲波清洗機展現出獨特的技術優勢，成為工業清洗環節的重要工具。

　　Heavy metals can certainly be cleaned using ultrasonic cleaning machines, and for the cleaning needs of heavy metal workpieces, ultrasonic cleaning machines have demonstrated unique technical advantages and become an important tool in the industrial cleaning process.

　　一、超聲波清洗技術原理

　　1、 Principle of Ultrasonic Cleaning Technology

　　超聲波清洗機通過換能器將電能轉化為20-40kHz高頻機械振動，在清洗液中形成“空化效應”。當聲波壓力超過液體靜壓力時，液體中產生數以萬計的微小氣泡并迅速坍縮，釋放出高速微射流與沖擊波。這種物理作用力可深入工件表面微孔、裂縫，剝離油污、氧化物及微粒雜質，清洗效率較傳統浸泡、噴淋方式提升3-5倍。

　　The ultrasonic cleaning machine converts electrical energy into 20-40kHz high-frequency mechanical vibration through a transducer, forming a "cavitation effect" in the cleaning solution. When the sound wave pressure exceeds the hydrostatic pressure of the liquid, tens of thousands of tiny bubbles are generated in the liquid and rapidly collapse, releasing high-speed microjets and shock waves. This physical force can penetrate into the micro pores and cracks on the surface of the workpiece, peel off oil stains, oxides, and particulate impurities, and improve cleaning efficiency by 3-5 times compared to traditional soaking and spraying methods.

　　二、重金屬清洗的技術適配性

　　2、 Technical adaptability of heavy metal cleaning

　　表面污垢清除：

　　Surface dirt removal:

　　重金屬工件在加工過程中易殘留切削液、防銹油及金屬碎屑。超聲波的空化作用可穿透0.1mm以下微小縫隙，對盲孔、螺紋等復雜結構的清洗盲區覆蓋率達98%。

　　Heavy metal workpieces are prone to residual cutting fluid, rust proof oil, and metal debris during the machining process. The cavitation effect of ultrasound can penetrate tiny gaps below 0.1mm, and the coverage rate of cleaning blind spots in complex structures such as blind holes and threads can reach 98%.

　　實驗數據顯示，針對銅合金工件，超聲波清洗較手工刷洗縮短75%時間，殘留油污厚度從12μm降至0.5μm以下。

　　Experimental data shows that for copper alloy workpieces, ultrasonic cleaning shortens the cleaning time by 75% compared to manual brushing, and reduces the residual oil stain thickness from 12 μ m to below 0.5 μ m.

　　氧化層去除：

　　Removal of oxide layer:

　　鋁、鐵等重金屬表面氧化層在超聲波振動下產生微裂紋，清洗液中的檸檬酸或磷酸等弱酸性介質通過空化氣泡的“微攪拌”效應加速滲透，使氧化層剝離速度提升40%。

　　The surface oxide layer of heavy metals such as aluminum and iron produces microcracks under ultrasonic vibration. Weak acidic media such as citric acid or phosphoric acid in the cleaning solution accelerate penetration through the "micro stirring" effect of cavitation bubbles, increasing the peeling speed of the oxide layer by 40%.

　　對于精密軸承鋼球，超聲波清洗可實現Ra0.02μm級表面粗糙度，滿足高精度裝配要求。

　　For precision bearing steel balls, ultrasonic cleaning can achieve a Ra0.02 μ m surface roughness, meeting high-precision assembly requirements.

　　無損清洗保障：

　　Non destructive cleaning guarantee:

　　超聲波能量密度控制在0.5-1.5W/cm?范圍內，可避免對重金屬基體產生腐蝕或應力損傷。

　　Is the ultrasonic energy density controlled between 0.5-1.5W/cm? Within the scope, it can avoid corrosion or stress damage to heavy metal substrates.

　　針對黃金、白銀等軟金屬，采用純水基清洗液配合38kHz低頻超聲波，在保證清洗效果的同時，使工件失重率低于0.001%。

　　For soft metals such as gold and silver, pure water-based cleaning solution combined with 38kHz low-frequency ultrasonic waves is used to ensure the cleaning effect while reducing the weight loss rate of the workpiece to less than 0.001%.

　　三、典型應用場景

　　3、 Typical application scenarios

　　電鍍前處理：

　　Pre electroplating treatment:

　　汽車輪轂電鍍前，超聲波清洗可去除表面硅油及氧化皮，使鍍層結合力提升30%，鹽霧試驗?zāi)透g時長延長至500小時。

　　Before electroplating car wheels, ultrasonic cleaning can remove surface silicone oil and oxide scale, increasing the adhesion of the coating by 30%, and extending the salt spray test corrosion resistance time to 500 hours.

　　半導體制造：

　　Semiconductor manufacturing:

　　晶圓夾具清洗中，超聲波配合EDTA螯合劑，有效去除0.1μm級金屬離子污染，保障芯片良率。

　　In wafer fixture cleaning, ultrasound combined with EDTA chelating agent effectively removes 0.1 μ m level metal ion contamination, ensuring chip yield.

　　航空航天：

　　Aerospace:

　　鈦合金航空緊固件清洗，采用真空超聲波設備，徹底清除微小螺紋內的鋁硅涂層殘留，疲勞強度測試達標率提升至99.5%。

　　Titanium alloy aviation fasteners are cleaned using vacuum ultrasonic equipment to thoroughly remove aluminum silicon coating residues inside small threads, and the fatigue strength test compliance rate is increased to 99.5%.

　　四、工藝優化方向

　　4、 Process optimization direction

　　清洗介質創新：

　　Innovation in cleaning media:

　　研發環保型水基清洗劑替代傳統三氯乙烯，通過表面活性劑與超聲波協同作用，實現重金屬離子螯合率超95%。

　　Developing environmentally friendly water-based cleaning agents to replace traditional trichloroethylene, achieving a chelation rate of over 95% for heavy metal ions through the synergistic effect of surfactants and ultrasound.

　　智能化控制：

　　Intelligent control:

　　搭載功率自動調節系統的超聲波清洗機，可根據工件材質動態調整能量輸出，避免過清洗或清洗不足。

　　The ultrasonic cleaning machine equipped with a power automatic adjustment system can dynamically adjust the energy output according to the material of the workpiece, avoiding over cleaning or insufficient cleaning.

　　復合清洗技術：

　　Composite cleaning technology:

　　超聲波與電解清洗復合工藝，針對不銹鋼工件，使除銹效率提升60%，表面粗糙度降至Ra0.1μm以下。

　　The composite process of ultrasonic and electrolytic cleaning improves the rust removal efficiency by 60% and reduces the surface roughness to below Ra0.1 μ m for stainless steel workpieces.

　　超聲波清洗機通過物理空化效應與化學清洗劑的協同作用，為重金屬工件提供了高效、精密的清洗解決方案。其技術優勢不僅體現在清洗效率與質量的突破，更在于對復雜結構工件及高價值金屬制品的無損處理能力。隨著清洗介質與智能控制技術的持續創新，超聲波清洗在重金屬加工領域的應用深度與廣度將進一步拓展。

　　The ultrasonic cleaning machine provides an efficient and precise cleaning solution for heavy metal workpieces through the synergistic effect of physical cavitation and chemical cleaning agents. Its technological advantages are not only reflected in breakthroughs in cleaning efficiency and quality, but also in its non-destructive treatment ability for complex structural workpieces and high-value metal products. With the continuous innovation of cleaning media and intelligent control technology, the application depth and breadth of ultrasonic cleaning in heavy metal processing will be further expanded.

　　本文由超聲波清洗機友情奉獻.更多有關的知識請點擊:http://m.qyqcc.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from a high-pressure deburring cleaning machine For more information, please click: http://m.qyqcc.cn We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message